1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909
1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909 - Hello Visitors, I hope today is your lucky day. At this time I will inform you about 1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909, this is a popular product at this month. Many people searching it through search engine to buy this product with cheapest price. The good news is we know that information and will tell you to buy 1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909 with lowest price on trusted Amazon in USA.
I and My team have figure out a place where we can get 1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909 with lower price, and I will give you specific information, I have surveyed several big companies and the facts say only on Amazon we could get 1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909 with lowest price, for further information please click the product detail. and we will bring you to a place where you can get cheapest price.
Product Details
- Amazon Sales Rank: #150005 in Home Improvement
- Brand: Fasco
Features
- 1.8 amps @ 230 Volts 60hz.
- Shaft: 1/2" x 6 1/2" Rotation = Reversible - Bolt Circle - 5.2"
- Belly Band Mount or Base Mount - Required 5 MFD 370V Capacitor Included
- Motor Length Less Shaft = 4"
- 1 Year Manufacture Warranty
Product Description
Application Information: Condenser Fan (Air Conditioner). Permanent Split Capacitor motor, Totally Enclosed-air over. Shaft down or Horizontal mount. All angle mount sleeve bearings, CSA certified, UL recognized, 60 degrees ambient temperature rating. Ball bearings. Motor has 4 drilled and tapped holes in shell.
Customer Reviews
Most helpful customer reviews
1 of 1 people found the following review helpful.
By Brandon Keith
I was quoted a price of almost $300 to replace my condenser fan motor. For a fraction of that price, this motor matched the specs perfectly, except that this one has ball bearings at each end to ensure even longer life. It was easy to install, I think it took me a couple of hours. I had to trim the shaft and I cut the mounting studs a little shorter. It seems to be a quality part, on par with the original or even better. Mine didn't come with any instructions, so you will need to know a little about wiring a motor. I was able to find specific information online for connecting the included capacitor, as my unit has a combined type of capacitor.
1 of 1 people found the following review helpful.
By G. Forster
I ordered this motor to replace an OEM unit that cost over $200 without the capacitor or shipping. For about $50, I got the motor, capacitor, and shipping.This is a 4-wire motor, so if you are replacing a 3-wire unit, you'll have to take care to wire it properly. There are pointers to be found on the Internet - if you know an electrician or technician, you might ask for a little advice.Also, the motor can be wired to run forward or reverse with a pair of jumper wires - mine had to be swapped to rotate the fan properly (pulling air out of the condenser unit).Another issue is that the studs holding the body together are very long. Once I tested operation of the motor, I removed each screw to trim about 1" so that I could move the fan blade as high as possible. The shaft is about 6" long, but I did not trim the excess from it.Finally, the wires from the motor are only about 18" long. That may not be long enough for some applications. The motor I removed had about 3' of wires. Be sure to use accepted methods if the wires have to be lengthened.I'm a handy guy, so the extra work to install this motor was worth the savings. If you have to hire an electrician or AC tech to install the motor, it may not save too much. This one's been installed for about a month and is working great.
0 of 0 people found the following review helpful.
By Download accounts
Recieved quickly. I own several rental properties and bought as a standby motor. Therefore it has not been installed yet. Great price.
1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909
1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909
1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909
Thanks for visited my blog. Please comment in here.
0 comments:
Post a Comment